Sattrak 3 controller
#1
Hi To the forum

There was a project that Graham VK5AGR ( Australian Amsat Coordinator ) was involved with in the 80s and 90s called Sattrak 3 and it was a stand alone controller for az/el rotators and doppler control.

I have rescued one that still powers up and inquiring if any one has any configuration information. circuits diagrams etc.

I realize that this going back 30 years but thought I would ask any way as I want to use the unit with a old ft736 that I have.

Thanks in advance
Nigel
Reply
#2
I don't suppose there were any write-ups in AR magazine that might be available from the archives ??

Trying to contact him directly would be the most obvious path to me. 
Google search with "Graham Ratcliff - The Wireless Institute of Australia" to get his contact details.

I was around back then but was not really interested in sats and AMSAT.
Doug VK4ADC @ QG62LG51
http://www.vk4adc.com

This Forum is only going to be as interesting as the posts it contains. 
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.
Reply
#3
There was some stuff on the Amsat (North America) website at one stage, not sure if it is still there.

A write up is in 73 magazine for May 1989 page 44 on.

A search of the AR index doesn't show anything on Sattrack 3 in particular.
Terry VK5TM
https://www.vk5tm.com
Reply
#4
Hi To the Forum
I have email Graham VK5AGR via the email address from the WIA, another gentleman sent me a pdf copy of that that review in 73 magazine.
I had not seen that review before. I originally built a sattrak 3 controller ( it would have to be at least 30 years ago ) that was a group build organised via Graham VK5AGR when he was the Amsat Australia coordinator ( not sure if he still is ) .
The project was very successful and Graham did a lot of extra development work that enhanced various features of the original project.

THanks
Nigel VK2NB
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)