+- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) - *** READ-ONLY *** (https://www.ahrdf.net/forum)
+-- Forum: GENERAL (https://www.ahrdf.net/forum/forumdisplay.php?fid=29)
+--- Forum: Transceivers, Transmitters & Receivers (https://www.ahrdf.net/forum/forumdisplay.php?fid=18)
+--- Thread: Yaesu FTdx1200 problem (/showthread.php?tid=699)
Yaesu FTdx1200 problem - VK4WDM - 28-12-2018
Turned on my FTdx1200 today and was greeted by the following fault:
Screen display only goes as far and the initial "Yaesu." All buttons locked up including scope and auto. No display except VFO B icon blinking green. Sound is coming from speaker and it is muted by the PTT.
Tried the reset given in the handbook: "turn transceiver off, hold down fast and lock buttons, turn on transceiver." Nothing happened.
Any ideas?
Wayne VK4WDM