VK5WRJ > 18-11-2022, 06:07 PM
VK3LU > 18-11-2022, 06:45 PM
VK2CSW > 19-11-2022, 05:27 AM
VK5WRJ > 21-11-2022, 09:46 AM
VK4ADC > 21-11-2022, 07:48 PM
VK5WRJ > 22-11-2022, 07:48 AM
VK5ZD > 23-11-2022, 08:55 AM
(22-11-2022, 07:48 AM)VK5WRJ Wrote: Hah, interesting Doug, I was using an Anderson plug to connect the 7300, removed it in favour of the eye connector setup in pic.
I agree with you re no chance of making a mistake with polarity, perhaps I'll revert to Anderson plugs, can still utilise the battery terminals/connectors and eyelets, would be neater than clamps.
Appreciate your idea re soldering the pins, they are pretty fiddly.
VK5WRJ > 24-11-2022, 04:21 PM
(23-11-2022, 08:55 AM)VK5ZD Wrote:(22-11-2022, 07:48 AM)VK5WRJ Wrote: Hah, interesting Doug, I was using an Anderson plug to connect the 7300, removed it in favour of the eye connector setup in pic.
I agree with you re no chance of making a mistake with polarity, perhaps I'll revert to Anderson plugs, can still utilise the battery terminals/connectors and eyelets, would be neater than clamps.
Appreciate your idea re soldering the pins, they are pretty fiddly.
Have a look at these examples of the sort of distribution boards you can buy or build. https://czh-labs.com/collections/powerpo...bution-445
I'm not suggesting you buy from this site. It's just one of many that sell these sorts of things. Personally, I've built my own.
Iain
VK6ZFG > 01-12-2022, 07:16 PM
VK4ADC > 01-12-2022, 07:33 PM
VK7TRF > 11-12-2022, 10:08 PM